Sony SPP-AQ600 - Manual (Page 45)

Symptom Remedy
The handset doesn’t ring. • Set the RING ON/BATT SAVE switch on the
handset to RING ON.
1/t
• The battery may be weak. Charge the battery for
more than 12 hours (page 12).
• Make sure you set up the base phone correctly (page
9).
’53
• Move the handset closer to the base phone.
u
0)
cc
• While you’re storing a speed dialing number, you
can’t receive any calls.
• Replace the handset to the base phone for a while to
recharge the battery pack.
You hear five short beeps • Make sure you follow the procedure in storing the
and can’t store a speed number correctly (page 19).
c dialing number. • Make sure the number (including the lone and pau.se
ffl
digits) is fewer than 16 digits.
■D You hear five short beeps • You entered a dialing key to which no phone
when you try to make a number has been stored.
in speed dialing call.
Speed dialing is incorrect. • Store a correct number (page 19).
The handset doesn’t ring • The handset may be engaged in conversation.
when calling from the base • Set the RING ON/BATT SAVE switch to RING
phone. ON.
E • The battery may have little or no power. Charge the
o
u battery for more than 12 hours (page 12).
<D • Raise the antenna of the base phone vertically and
C
fully extended.
• Place the base phone away from noise sources (page
8).
• Move the handset closer to the base phone.
>
a
a
o
3
SL
3
o
T
3
S)
r*
5'
3
continued
Additional Information 45^