Before you use your receiver, 1 turn off the receiver, 2 while pressing down sound field genre and – Sony STR-DA50ES User Manual

Page 19: Sound field on/off, press l/(!) to turn on the, Receiver, 1 press l/c!) to turn on the receiver, 3 turn on the component and start playing it, 4 rotate master volume to turn up the volume

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before You Use Your Receiver

Before turning on the receiver

Make sure that you have:

• Turned MASTER VOLUME to the leftmost position (0).

• Selected the appropriate front speakers (see “{8}

SPEAKERS selector" on page 23).

• Set BALANCE to the center position.

Clearing the receiver's memory

Before you use your receiver for the first time or when

you want to clear the receiver's memory, do the following.

I/Ci)

1

Turn off the receiver.

2

While pressing down SOUND FIELD GENRE and

SOUND FIELD ON/OFF, press l/(!) to turn on the

receiver.

"ALL CLEAR" appears in the display and the items
including the following are reset or cleared:

• All preset stations are reset or cleared.

• All sound field parameters are reset" to their factory

settings.

• All index names (of preset stations and program

sources) are cleared. '

• All adjustments made with the SET UP button are

reset to their factory settings.

• The sound field memorized for each program source

and preset stations are cleared.

Checking the connections

After connecting all of your components to the receiver,

do the following to verify that the connections were made

correctly.

I/Ci)

1 Press l/c!) to turn on the receiver.

2

Rotate FUNCTION to select a component (program

source) that you connected (e.g., CD player or tape

deck).

3

Turn on the component and start playing it.

4

Rotate MASTER VOLUME to turn up the volume.

If you do not obtain normal sound output after

performing this procedure, look for the reason in the
following checklist and take the appropriate measures to
correct the problem.

There is no sound no matter which component is
selected.

^ Check that both the receiver and all components

are turned on.
Check that the MASTER VOLUME control is not

set at 0.
Check that the SPEAKERS selector is not set to

OFF or to a position for front speakers that are not
connected to the receiver (see "[§] SPEAKERS
selector" on page 23).

^ Check that all speaker cords are connected

correctly.

^ Press the MUTING button to turn off the indicator

above the button.

3

(fi

■D

3

a
VI

16
5

3

'

c

*0

VI

•D

(6

fii

yr

fp

VI

»<

V)

r*

(P

3

19

Advertising