Sony STR-DA50ES - Manual (Page 8)

Digital Component Hookups
^ Connect the digital output jacks of yc'ur DVD player and
DBS tuner (etc.) to the receir er's digital input jacks to
bring the multi channel surround sound of a movie
theater into your home. To enjoy full effecf of multi
channel surround sound, five speakers (fwo front
speakers, two rear speakers, and a center speaker) and a
subwoofer are required. You can also connect an LD
player with an’IiF OUT jack via an RF demodulator, like
the Sony MOD-RFl (not supplied).
TV or DBS tuner
(TV tuner or LO player)
Required cords
Optical digital cords (not supplied)
Black ■dii~lB!!!i amte Black
Coaxial digital cord (not supplied)
Yellow c^i III)]— = =01111 Ik» Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow (video) Yellow (video)
White (L/audio)^^^^^ White (L/audio)
Red (R/audio) Red (R/audio)
* If your DVD player is equipped with a COAXIAL OUTPUT, do not
make optical connections. Only connect the DVD player to the
receiver's DVD IN COAXIAL jack.
Example of LD player connected via an RF demodulator
Please note that you carmot connect an LD player's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF demodulator, then
connect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL DVD/LD (TV/LD) IN or COAXIAL
DVD/LD IN jack (USA/Canada only). Refer to the instruction manual supplied with your RF Demodulator for details on
AC-3 RF hookups.
Note
When making connections as shown above, be sure to set INPUT MODE (
INPUT MODE is set to "AUTO." ] on page 23) manually. This unit may not operate correctly if