Required cords, Video component hookups – Sony STR-DA50ES User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Video Component Hookups
Required cords
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Yellow
(video)
White (L/audio)s=
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
Video cord for connecting a TV monitor (not supplied)
Yellow ‘= i M
p
= — = c 3 B tJ Yellow
IflD
on. ai
■KB__
manmm
©
f©®
aOBWi
©
ONKRj
_
©
m m
e
To the w
front
^
panel
/'
TV monitor
Camcorder
or video game
Connect a
To the
TV or DBS tuner
TV/DBS jacks (LKA/Canada)
TV tuner or LD player
TV/LD jacks (Other countries)
VCR
VIDEO 1 jacks
Additional VCR
VIDEO 2 jacks
DVD or LD player
LD/DVD jacks (USA/Canada)
DVD player
DVD jacks (Other countries)
TV monitor
MONITOR VIDEO OUT jack
Camcorder or video game
VIDEO 3 INPUT jacks on the
front panel
You can connect your TV's audio output jacks to the TV /
DBS (TV/LD) AUDIO IN jacks on the receiver and apply
sound effects to the audio from the TV. In dtis case, do not
connect die TV's video output jack to the TV / DBS (TV /
LD) VIDEO IN jack on the receiver. If you are connecting
a separate TV tuner (or DBS tuner), connect both the
audio and video output jacks to the receiver as shown
above.
V
When using the S-video Jades instead of the video jacks
Your monitor must also be Connected via an S-video jack. S-video
signals are on a separate bus from the video signals and will not
be output through the video jacks.