The ebp-55 battery case (optional) is required, To remove the battery case, Battery life – Sony CCD-F33 User Manual

Page 11: Connecting the power sources, Using the alkaline batteries

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Connecting the Power Sources

Notes

• When the video camera recorder is not in use,

remove the battery pack.

If the battery is installed, even if the POWER

switch is set to OFF, a very small amount of

electric current flows.

• The video camera recorder consumes power even

in the recording pause mode. When recording

short scenes using the recording pause mode, the

battery life is less than half that of continuous

recording.

When recording is not to be started soon, turn off

the power with the STANDBY switch.

• If the battery pack is not fully charged or if it is used

in a cold place, its operating time is also shortened.

B-5

EBP-55

Using the Alkaline Batteries

The EBP-55 battery case (optional) is

required.

1 Insert the six R6 (size AA) alkaline batteries

into the battery case.

2 Align the right side of the battery case with the

line on the recorder, and while pressing the

battery case, slide it to the right.

To remove the battery case

While pressing the ВАТТ knob on the recorder,
slide and pull out the battery case.

Battery life

With new alkaline batteries, the battery case

provides approximately 40 minutes of continuous
camera recording when used indoors.

Notes on the battery case

• Be sure to use the alkaline batteries.

• The battery case cannot be used in a cold place.

• The OQ indication may not blink when the batteries

in the battery case become weak, as the voltage of

the battery lowers suddenly. If the cassette

compartment does not open, replace the batteries.

Advertising