Before you begin, Operation, To change the ending point – Sony CCD-F33 User Manual

Page 39: Insert recording from the vcr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Insert Recording from the

VCR

1

fcMIER^

OFf i ^

r VTB

ij"

O I

^

I

ZERO MEM

STBV

^vOlOOII0y

-ZERO MEN;

'Fillin'^

8

You can insert a new scene from the TV or VCR
onto your originally recorded tape.

Before you begin

• Connection is the same as in “Recording a TV

Program”.

• You can see the picture from the VCR in the

viewfinder screen.

Operation

1 While pressing the small button, set the

POWER switch to VTR.

2 Locate the point on the tape where the insert

should end by pressing the or button
during playback.

3 Press the COUNTER RESET button. The

counter is reset to zero.

4 Press the button during playback to

rewind the tape a little further than the point

where the insert should begin.

5 Release the button to resume playback

and press the II button at the insert starting
point.

6 Slide the • REC switch in the arrow direction

to set the unit to recording pause mode.

7 Press the ZERO MEM button.

The insert ending point is stored in the

memory.

8 To start recording, press the II button.

The insert recording will stop automatically near
the counter zero point.

To change the ending point

Press the ZERO MEM button so that the ZERO
MEM indicator disappears, and operate again

from step 2

39

Advertising