Sony CCD-F33 - Manual (Page 9)

Before recording, prepare your recorder following
the steps belovir:
1. Connect a power source. -»see page 9.
2.
Set the date and time. see page 14.
3. Insert a tape. see page 16.
4. Adjust the viewfinder lens. -»see page 17.
5. Adjust the length of the grip belt.
->
see page 6.
6. Set the auto function on. -»see page 19.
The focus, white balance, iris (back light), and
shutter speed will be adjusted automatically. If
you want to adjust them manually, see page 23.
When you have completed these preparations, go
to page 18.
First, choose the power source.
Power source Accessory to be used
S2
o
o
"D
C
House current AC power adaptor
AC-V35, AC-V35A,
AC-V55orAC-V30
(page 12)
S2
o
o
2
3
o
Battery pack Battery pack NP-55 or
large capacity battery
pack NP-77, NP-77H or
NP-66H (page 10)
Alkaline battery Battery case EBP-55
(page 11)
S
0>
2
c
1 2 V o r 2 4 V
car battery
DC pack DCP-55
(page 12)
(DCC-16B car battery
cord supplied)
Notes on power source
« Disconnecting the power source or removing the
battery pack during recording or playback may
damage the inserted cassette tape. If this is done
by accident, supply the power again immediately
and turn on the power switch.
• Be careful not to let any metal object touch the
metal part on the battery pack or AC power
adaptor. When the battery pack is not to be used,
keep it in its case.
9