Tuning and presetting radio stations, 1 it, Basic operations – Sony STR-DE905G User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Basic Operations

Tuning and Presetting Radio

Stations

This receiver lets you tune and preset radio stations
from the on-screen display. You can store up to 30 FM
or AM stations, and recall them later with a simple

click. To assign names to the preset stations, see page
35.

Before you begin, make sure you have:
• Connected the RC antenna securely and correctly as

indicated on page 9 (STR-DE-905G only).

• Connected an FM/AM antennas to the receiver as

indicated on page 10.

1

Click FUNCTION in the main menu.

2

Click TUNER.

3

Click BAND to select FM or AM.

6

Click LIST to display the memory list.

I 1 LIST 11 SUB 1

USER

IG 1 1 BAND 1 FM IcC^OMHz STEAgo

7

Click ABC repeatedly to select the page (A, B, or
C) where you want to store the station.

0

FM 95.50MHz 1

A B C

1 MEMORY 1

[♦ EXIT

Q"!) 1 BAND

FM 102.50MHz STEREO

-1 It

8

Click MEMORY.

MEMORY turns red.

ABC

1 MEMORY 1

______1_______

> EXIT

□ 1 1 BAND

FM 102.5CJH

z

stereo

9

Click the button (0 to 9) where you want to store

the station.

The button lights up and the station is stored.

1 FM 102.50MH2

2

FM 92.00MHz

3

FM 94.50MHz

FM 92.00MHz

FM 89.5(MHz

6

FM 89.50MHz

7

FM 104.50MHz

8

FM 101.00MHz

9

FM 96.00MHz

0

FM 95.50MHz

a

ABC

1 MEMORY 1 I !♦ EXIT

□ 1 1 BAND

FM 102.50MHz STEREO | — | | +

4

Click SUB, then dick on TUNE MODE

MANUAL/ AUTO to select the tuning mode.

Select MANUAL for manual station selection.

"Select AUTO for automatic station selection.

5

Click the + or - icon next to the frequency to tune
in a station.

a

I I

LIST I

I

SUB

I

I USER

G

I I

band

! FM 102.50MH

z

i 0

Repeat steps 4 through 10 to preset up to 30

stations.

During automatic tuning
When you tune past either end of the band, the
receiver automatically jumps to the opposite end and
continues scanning in the same direction. Every time a
station is received, the receiver stops scanning. To
continue scanning, press the icon again.

To change a preset station

Preset a new station at the number you want to change.

Note

If the AC power cord is disconnected for about one week,

the preset stations will be cleared from the receiver's

memory, and vou'will have lt> preset the stations again.

To watch FM simulcast TV programs

Make sure that vt'u tune in the simulcast program on

both the TV {or VCR) and the receiver.

26

Advertising
This manual is related to the following products: