Sony STR-DE905G - Manual (Page 43)

Settings and Adjustments
AUTO OSD ERASE:
This display mode is useful during laser disc operations
since it allows you to see chapter numbers that
otherwise might be hidden by the control panel.
When this mode is on, control panels disappear
whenever you click and hold down a control button.
When you release the button, the control panel
reappears.
POINTER ONLY:
This display mode allows you to use the pointer to
point to various on screen items, such as during a
presentation (etc.).
When you click POINTER ONLY SET, the on-screen
display disappears except for the pointer and an EXIT
button. To freeze the pointer, hold down tlie button on
the remote.
DEMO:’'
This display mode activates a program that explains the
various functions of the receiver. Please note that when
the program is running it replaces previously stored
data (such as surround sound parameters) with data
from the program. Therefore, you should only use tlie
DEMO mode when no data has been stored or when
rewriting existing data does not matter.
Click START to activate the program. To stop the
program, click the button on the remote two or three
times.
IR OUTPUT:
Set to IR OUTPUT to OFF if you connect the IR repeater.
When it is set to OFF, the IR signals are only output
from the IR OUT jack on the rear panel. No IR signals
will be output from the IR repeater on the front panel.
When the IR OUTPUT is set to OFF, "IR OFF" appears
in the main menu.
Normally, if you do not connect the IR repeater, IR
OUTPUT should be set to ON,
Adjusting the Position of the
On-Screen Display
The graphic position function (GRAPFilC POSITION)
lets you make fine adjustments to the overall position
of the on-screen display control panel.
1 Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2 Click TV SET.
3 Click GRAPHIC POSITION SET.
The position adjustment screen appears.
TV MONITOR SET
TV INPUT
TV SIZE
GRAPHIC POSITION
I U RETURN I
-fr
The position adjustment screen appears.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
Click the hoarders to adjust the position so you
can just see the top, bottom, right and left edges of
the boarder.
4 Click EXIT.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
43