Sony SLV-SE220G User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To
Press
Switch to Teletext*’
/
(Teletext)
Select the sound*
2
AUDIO MONITOR
Use FASTEXT*’
FASTEXT buttons
Call up the on-screen display
(E)
DISPLAY
Change the Teletext page*’
c
/'
@
Switch to/from wide mode of a Sony wide TV (For
other manufactures’ wide TVs, see “Controlling
other TVs with the remote commander (SLV-
(wide)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types ofbatteries together.
• Some buttons may not work with certain Sony TVs.
*> SLV-SE820G only
*^not available on SLV-SE220G/I
Controlling other TVs with the remote commander (SLV-
SE820G only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the following table, set the appropriate manufacturer’s code
number.
^ Set
|TV|
/
[VIDEO I
at the top o
f
the remote commander to
|TV|
.
2
Hold down 1/1, and enter your TV’s code number using the programme
numberbuttons. Thenrelease 1/1.
Now you can use the following TV control buttons to control your TV:
1/1, t TV/VIDEO, programme number buttons, — (ten’s digit),
PROG +/-,
2
+/-, a (TV), / (Teletext), FASTEXT buttons,
(wide)*, MENU*, M/m/</,*, and OK*.
• These buttons may not work with all TVs.
14 Settinguptheremotecommander