Step 3 : connecting the vcr, Ifyourtv does not have a scart (euro-av) connector, 16 step 3 : connecting the vcr – Sony SLV-SE220G User Manual
Page 16: R (16)(17)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 3 : Connecting the VCR
If your TV has a Scarf (EURO-AV) connector, see page 17.
IfyourTV does not have a Scart (EURO-AV) connector
. : signal flow
1
Disconnect the aerial cable from your
TV and connect it t o n r on the rear
panel of the VCR.
ir
Connect^ of the VCR and the aerial
input of your TV using the supplied
aerial cable.
ir
Connect the mains lead to the mains.
* •
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 20).
16 Connecting the VCR
Advertising