Sony SLV-SE220G - Manual (Page 35)

Notes
• The counter resets to “0:00:00” or “00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
-The picture becomes black and white.
-The picture shakes.
-No picture appears on the TV screen.
-Black streaks appear horizontally on the TV screen.
-The colour density increases or decreases.
• While setting the menu on the TV screen, buttons for playback on the remote .
commander do not function. I
Starting playback automatically with one button (One
Touch Play) (not available on SLV-SE220G/I)
If you use the SMARTLINK eonneetion, you can turn on the TV, set the TV
to the video channel, and start playback automatically with one button.
^ Insert a tape.
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and
switches to the video channel. Playback starts automatically.
2 Press (play).
The TV turns on and switches to the video channel automatically.
Playback starts.
00
&)
VI
O
T3
o
3
VI
Tip
• When there already is a tape in the VCR, press 1/1 to turn on the VCR first. When
you press (play), the TV turns on, the TV is set to the video channel, and
playback starts automatically in one sequence.
Note
• When you use the One Touch Play function, leave the TV on or in the standby
mode.
Playing a tape 35