Specifications, System, Inputs and outputs – Sony SLV-SE220G User Manual
Page 73: General, Supplied accessories
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
System
Channel coverage
PAL (I)
VHF lAto IJ, SAIO to SA13*
UHF B21 to B69
CATV SO1 to SO5,S1 to S2O*
HYPER S21 to S41*
RF output signal
UHF channels 21to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL 23.39 mm/s (recording/
playback)
NTSC 33.35 mm/s (playback only)
LP: PAL 11.7O mm/s (recording/
playback)
NTSC 16.67 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
1O hrs. in LP mode (with E3OO tape)
Rewind time
Approx. 1 min. (with E18O tape)
* SLV-SE72OI and SE22OI only
Inputs and outputs
LINE-1 (EURO AV)
21-pin
Video input: pin 2O
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2/LINE-3
21-pin
Video input: pin 2O
Audio input: pins 2 and 6
t LINE-2 L O R*>
VIDEO IN, phonojack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
AUDIO (OUT) R, L*
2
Phonojack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 1O kilohms
*> SLV-SE82OG only
*
2
not available on SLV-SE22OG/I
General
Power requirements
22O - 24O V AC, 5O Hz
Power consumption
15 W (SLV-SE22OG/I)
17 W (SLV-SE82OG and SE72OG/I)
3 W (POWER SAVE is set to ON,
minimum)
Operating temperature
5°C to 4O°C
Storage temperature
-2O°C to 6O°C
Dimensions including projecting parts and
controls (w/h/d)
Approx. 36O x 95 x 243 mm
(SLV-SE22OG/I)
Approx. 43O x 96 x 242 mm
(SLV-SE72OG/I)
Approx. 43O x 96 x 251 mm
(SLV-SE82OG)
Mass
Approx. 2.8 kg (SLV-SE22OG/I)
Approx. 3.1kg (SLV-SE82OG and
SE72OG/I)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.
>
a.
a
o'
3
w
3
o'
3
o'
3
Specifications 73