Connecting a tv with audlo/video inputs – Sony CCD-FX310 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
In the earlier section (page 17) we explained the basic connection to your TV with the RFU
adaptor. In this section we discuss several other ways of connecting to your TV.
Connecting a TV with Audlo/VIdeo Inputs
There are several ways to connect your camcorder to your TV. If your TV has audio/video
inputs, use an A/V cable. Before connecting, make sure that your TV is turned off to
prevent speaker damage.
If your TV has only an antenna Input, see page 17.
Use an AA/ cable to connect your TV and camcorder:
[a] If your TV is a stereo type, use the VMC-910MS/920MS A/V connecting cable
(not supplied).
[b] If your TV IS a monoaural type, use the VMC-710M/720M A/V connecting cable
(not supplied).
Connect the AC adaptor to a wall outlet.
Attach the connecting plate of the AC power adaptor to the camcorder.
Set the CHARGE/VTR selector on the AC power adaptor to VTR (DC OUT).
Advanced Camera Operation
33