Preveriting accldlental erasur, Preventing accidental erasure – Sony CCD-FX310 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\
m
Make sure that the battery pack or another power source is attached.
1
Press the small blue button
on the EJECT switch and
simultaneously slide EJECT
in the direction of the arrow.
The cassette compartment
automatically lifts up and opens
toward you.
EJECT
V-
s
Insert a tape with the
window facing outside.
Ciose the cassette holder by
pressing the area on the
cassette compartment
marked “PUSH”.
Preveriting Accldlental Erasur
Slide the red tab closing the window to prevent accidental recording. To re-record on the
tape, slide the tab opening the window.
If you try to record with the red mark exposed, the № and
±
indicators flash In the
viewfinder and beeps sound for about 5 seconds.
Notes on handling tapes
Don't insert anything in the small holes on the rear of the cassette. These holes are used to sense the
type and thickness of tape, or if the red mark is exposed or covered, etc. Store tapes in their cases
and keep them in an upright position to prevent intrusion of dusf and uneven winding.
8 Getting Started