I you also need to set the beep switch – Sony CCD-FX310 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check that the following accessories are supplied with your camcorder.
f i l l
i r - l
Before you can use your camcorder, you need to:
1 Charge and install the battery pack.
2 Insert a tape.
3 Adjust the viewfinder lens to your eyes.
4 Install the lithium battery.
5 Set the date and time.
This chapter takes you through these procedures step by step.
I You also need to set the BEEP switch
• The BEEP switch is preset to ON: the camcorder will beep when you start and stop
recording and as a warning of unusual conditions (see page 50). These beeps will
not be recorded on the tape.
• Set the BEEP switch to OFF, to deactivate the beep.