Connections for playback, Usi -lasi, To play back on a tv – Sony CCD-TR916 User Manual
Page 16: To release laser link
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for playback
Connect the camcorder to your VCR or TV to watch the playback picture on the TV
screen. When monitoring the playback picture by connecting the camcorder to your TV,
we recommend you to use house current for the power source.
Open the jack cover. With using the supplied A/V connecting cable, connect the
camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV /
VCR selector on the TV to VCR. When cormecting to the VCR, set the input selector on
the VCR to LINE.
: Signal flow
To connect to a VCR or TV without Video/Audio input jacks
Use the RFU-95UC RFU adaptor (not supplied).
Usi
-LASI
cordless IR
Once you cormect the AV cordless IR receiver (not supplied) having the i LASER LINK
mark to your TV or VCR, you can easily view the picture on your TV.
LASER LINK is a system which transmits and receives a picture and sound between
video equipment having the i mark by using infrared rays. LASER LINK is a
trademark of Sony Corporation.
To play back on a TV
(1) Set the POWER switch on the camcorder to PLAYER.
(
2
)
After connecting your TV and AV cordless IR receiver, set the POWER switch
on the AV cordless IR receiver to ON.
(3)
Turn the TV on and set the TV/VCR selector on the TV to VCR.
(4)
Press LASER LINK. The lamp of LASER LINK lights.
(5)
Adjust the angle and direction of both the camcorder and AV cordless IR
receiver.
(
6
)
Press ► on the camcorder to start playback.
16
To release LASER LINK
Press LASER LINK again.