Ing the wide mode function, To cancel wide mode, To watch the tape recorded in wide mode – Sony CCD-TR916 User Manual
Page 31: Notes on wide mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ing the wide mode function
While the camcorder is in Standby mode, press 16:9 WIDE repeatedly so that the
desired mode indicator appears.
>
Q.
<
a
o
■o
To cancel wide mode
Press 16:9 WIDE repeatedly until the wide mode indicator disappears.
To watch the tape recorded in wide mode
To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen
TV to zoom mode. To watch the tape recorded in 16:9FULL mode, set it to full mode.
For details, refer to the instruction manual of your TV.
Note that the picture recorded in 16:9FULL mode looks compressed on a normal TV.
Notes on wide mode
• You cannot cancel the wide mode during recording.
• If wide mode is set to 16:9FULL, the SteadyShot function does not work and the «0»
indicator flashes.
• When you record in 16:9FULL mode, the date or time indicator will be widened on
the wide-screen TV.
• If you dub a tape, the tape is copied in the same mode as the original recording.
• The wide mode is cancelled automatically 5 minutes after you remove the power
source.
31