Anging the lithium battery in the camcorder, Lanc – Sony CCD-TR916 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
anging the lithium battery in the camcorder
lanc
t)As
><*
mm
ras tcpY
When replacing the lithium battery, keep the battery pack or other power source
attached. Otherwise, you will need to reset the date and hme .
(
1
)
Slide the cover and then pull it up.
(
2
)
Push the battery in once and pull it out from the holder.
(3) Install the new lithium battery with the positive (+) side facing out.
(4) Close the cover. Then slide the cover until it clicks.
45
Advertising