Sony MDS-JE510 - Manual (Page 24)

Playing MDs Editing Recorded MDs
5 Set the timer as required.
• When you have set the time for the start of
playback, the dock turns off. When the
specified fime arrives, the deck turns on and
starts playing.
~ • When you have set the time for the end of
playback, playback confinues. When the
specified fime arrives, the deck stops playing
and turns off.
• When you have set the time for bofh the start
and end of playback, the deck turns off. When
the starting time arrix os, the deck turns on and
starts playing. When the ending time arrives,
the deck stops plaving and turns off.
6
After you ha\ e finished using the timer, set
TIMER on the deck to OFF.
Note
Yt>u can select Program Play in Step 2. Note, howex’er, that
programs ex-entuallv fade axvav when the standby status is
off, and therefore if you set the time Uxi far in the future, the
program may be gone when the specified time arrives. If
this has iKcurred, the deck enters normal play mode at the
specified time and the tracks play in consecutive order.
Notes on Editing
W hi can edit Iho rocordod tracks after recording, using
the following functions:
• Erase Function allows you to erase recorded tracks
simply by specih ing the correspi>nding track
number.
• Divide Function allows you to divide tracks at
specified points so that you can quickly locate those
points afterwards, using the AMS function.
• Combine Function allows you to combine two
consecutix'e tracks into one.
• Mo\ e Function alUnvs \ ou to change the order of
tracks by mo\’ing a specific track to a track position
you want.
• Title Function allows vou to create titles for your
recorded MDs and tracks.
If "Protected" appears in the display
The deck could not edit because the record-protect slot on
the MD is open. Edit after closing the slot.
When "TOC" flashes in the display
Do not move the deck or pull out the AC power cord. After
editing, "TOC" lights continuously until you eject the MD or
turn off the power. "TOC" flashes while the deck is
updating the TOC. When the deck finishes updating the
TOC, "TOC'goes off.
Erasing Recordings
(Erase Function)
Do the procedures below to erase following;
• A single track
• All tracks
• Parts of a track
Note, however, that once erased, MD data cannot
be recovered.
EDIT/NO KJ< AMS >t>J YES
22