Playing an md – Sony MDS-JE510 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Playing an MD
'Q' You canHocate and play back
a track while the deck is
stopped
1
Turn AMS (or press
or ►►!) until the number
of the track you want to
play appears.
2
Press AMS or O.
'O' To use headphones
Connect them to PHONES
jack. Use PHONE LEVEL to
adjust the volume.
1
Turn on the amplifier and set the source selector to the position
for MD deck.
Press POWER.
The POWER indicator changes from red to green.
Insert an MD.
With the arrow
pointing this way
Press O.
The deck starts playing.
Adjust the volume on the amplifier.
To
Do the following;
Stop playing
Press ■.
Pause playing
Press II. Press the button again or press
O to resume playing.
(3o to the next track
Turn AMS clockwise (or press on
the remote).
Go to the preceding tr^k
Turn AMS counterclockwise (or press .
on the remote).
Take out the MD
Press = EJECT after stoppmg playing.