Notes, Playing back tracks just recorded, Recording over existing tracks – Sony MDS-JE520 User Manual
Page 11: While "tr" flashes in the display, Q to record from the middle of the track, Note, Recording on mds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording on MDs
Notes
• When \'ou turn ott tlie Smart Space Functie>n, the Auto Cut
Function is also turned oft automatically.
• I'he Smart Space Function and Auto Cut Function are
factory set to on.
• It you turn ott the deck or disconnect the AC power cord,
the deck will recall the last setting (On or Oft) of the Smart
Space and Auto Cut Functions the next time vou turn on
the deck.
Playing back tracks just recorded
Do this procedviro to immediately play back tracks that
have just been recorcied.
Recording Over Existing Tracks
Follow the procedure below to record over existing
material just as vou would on an analog cassette tape.
KM AMS OW
eij cs CD
\« /►« —
. ^
:±]1_5
i_D CD
d
5 1+^
;jD •iS> ¿D
Press O immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
1 Press ■ again after stopping recording.
2 Press O.
Playback starts from the first track of the MD.
1
Do Steps I to 5 in "Recording on an MD" on
page 6.
2
Turn AMS (or press or
►►!)
until the
number of the track to be recorded over appears.
3
To record from the start of the track, continue
from Step 6 in "Recording on an MD" on page 7.
While "Tr" flashes in the display
The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.
Q
To record from the middle of the track
1 After Step 2 above, press to start playback.
2 Press II where you want to start recording.
3 Continue from Step 6 in "Recording on an MD" on
page 7.
Note
You cannot record from the middle of an existing track when
the "PROGRAM" or "SHUFFLE" is on.
IV