Sony MDS-JE520 - Manual (Page 8)

Basic Operations
Playing an MD
'Q' You can locate and play back
a track while the deck is
stopped
1 Turn AMS (or press or
►W) until the number of the
track you want to play
appears.
2 Press AMS or I>,
To use headphones
Connect them to PHONES jack.
Use PHONE LEVEL to adjust
the volume.
Q' You can adjust the analog
signal level output to the
LINE (ANALOG) OUT jacks
1 While the deck is playing,
press LEVEL / DISPLAY /
CHAR repeatedly until the
line output adjustment
display appears.
2 Turn AMS (or press LEVEL
+ /- on the remote) to adjust
the output signal level.
Notes
• The output level for the
PHONES jack is also
changed.
• When you eject the MD or
turn off the power by
pressing the l/(l) switch, the
output level is reset to the
initial setting (O.OdB).
1 Turn on the amplifier and set the source selector to the position
for MD deck.
Press l/C!).
The STANDBY indicator turns off.
Insert an MD.
With the arrow pointing this way
Jt Press l>.
"T The deck starts playing. Adjust the volume on the amplifier.
To Do the following;
Stop playing Press ■.
Pause playing Press II. Press the button again or press O to
resume playing.
Go to the next track Turn AMS clockwise (or press on the
remote).
Go to the current track
or the preceding track Turn AMS counterclockwise (or press‘h4^ on the
remote).
Take out the MD Press = EJECT after stopping playing.