Sony MDS-JE520 - Manual (Page 21)

Playing MDs
You can extend the playing time during music scan
1 While the deek is stopped, press MENU/NO twice to
displa\’ "Setup Menu".
2 Turn AMS to select "Setup 07", then press AMS.
3 Turn AMS to select the plaving time within a range ot
6 to 20 seconds (in 1 second steps), then press AMS.
4 Press MENU/NO.
To pause playing at the beginning of a track
Turn AMS (or press or ►►!) after pausing
playback.
9° quickly to the beginning of the last track
Turn AMS counterclockwise (or press ) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable disc only), or disc name (see page 19).
Locating a Particular Point in a
Track
You can also use the *4^ and ►► buttons to locate a
particular point in a track during playback or playback
pause.
To locate a point Press
While monitoring the
sound ►► (forward) or (backward) and
keep pressing until you find the point.
Quickly by observing
the display during
playback pause ►► or « and keep pressing until
you find the point. There is no sound
output during this operation.
*Q* If "—Over—" appears while you are pressing ►►
during playback pause
The disc has reached to its end. Press (or ) or
turn AMS counterclockwise to go back.
Notes
• If the disc reaches the end while you are pressing ►►
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
2 V