Sony GDM-W900 - Manual (Page 13)

Adjustments (Expert mode)
You can adjust more in detail in the expert mode than in the
normal mode.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select "LANGUAGE" in the "OPTION" OSD, then select
"ENG" (English) on page 8.
1 Press the OPTION button.
The "OPTION" OSD appears.
OPTION
OPTION
►LANGUAGE »JPN -ENG -FRA
■DEU -ESP -ITA
OSD POSITION: RIGHT BOTTOM
OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC 84,4kHz/72Hz
B B SELECT a B SET
2 Press the ii-f/t button to select "OSD MENU."
The "OSD MENU" turns yellow.
-
I
OPTION
LANGUAGE -JPN -ENG -FRA
•DEU -ESP -ITA
OSD POSITION: RIGHT BOTTOM
►OSD MENU -NORMAL -EXPERT
LOCK -UNLOCK -LOCK
INPUT: BNC 84.4kHz/72Hz
B B SELECT B e SET
3 Press the button to select "EXPERT."
Move the green ■ to EXPERT.
appears at the top right comer of the OSD in
Expert mode.
- 3 +
im
OPTION
LANGUAGE -JPN -ENG -FRA
•DEU -ESP -ITA
OSD POSITION: RIOIT BOTTOM
►OSD MENU •NORMAL -EXPERT
LOCK ■UNLOCK -LOCK
INPUT: BNC 84,4kHz/72Hz
B B SELECT S B SET/ADJUST
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
K*—
The adjustment data becomes the common setting for all
input signals received.
1 Press the button or the button.
The "BRIGHTNESS/CONTRAST" OSD appears.
BRIGHTNESS/CONTRAST
►(•CONTRAST !■ " 1 10
•&BRIGHTNESS 1» I 23
№ESET
-1 -2 -3
B B SELECT 8 B SET/ADJUST
2 Press the ■Cl'f/♦ button to select "PRESET" and the
9 button to select a preset number.
When you want to use the monitor later in the same
condition, just select the same preset number.
3 Press the button or the button to
adjust the brightness or contrast
BRIGHTNESS:
Adjusts the picture brightness.
3
CONTRAST:
Adjusts the pictiure contrast.
The OSD automatically disappears after about 30 seconds.
To tiun off the OSD, press the ♦ or
button
again.
To reset, press the RESET button while the OSD is on. The
selected preset number is reset
13