Umi), Expert, Adjustments – Sony GDM-W900 User Manual
Page 14: Mode)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustments
(Expert
mode)
ilft'J -ili-'
The adjustment data becomes the individual setting for each
input signal received.
1
Press the SIZE button or the CENT button.
The "CENTER/SIZE" OSD appears.
CENTER/SIZE
watM
►C3H CENTER
■
ZD 10
QV CENTER
IS ......
Z3 10
Si SIZE
liS......
Z3 23
GOV SIZE
es------ ZD 23
B a SELECT
E В ADJUST
2 Press the button to select and the 3
button to adjust the parameter.
O
H CENTER:
Adjusts the picture position in horizontal direction.
0
V CENTER:
Adjusts the picture position in vertical direction.
HSIZE:
Adjusts the picture size in horizontcd direction,
GO
VSIZE:
Adjusts the picture size in vertical direction.
The OSD automatically disapjjears after about 30 seconds.
To turn off the OSD, press the SIZE or CENT button again.
To reset, press the RESET button while the OSD is on. The
selected parameter is reset. .
The adjustment data becomes the individual setting for each
input signal received.
1 Press the GEOM button.
The "GEOMETRY" OSD appears.
GEa.1ETRY
►E3H PINCUSHION
OH PIN BAL
OH KEYSTONE
QH KEY BAL
CAROTATION
OS PINCUSHION
OS PIN BAL
OC
boy
;
OFLARE TOP
OF LARE BOT
ev LINEARITY
BV LIN BAL
D D SELECT В C ADJUST
2 Press the Ijf button to select and the Э
button to adjust the parameter.
О H PINCUSHION/ a H PIN BAL
Corrects the picture distortion of the picture edges.
О H KEYSTONE:
Corrects the difference of picture size at the top and
bottom.
О H KEY BAL
Corrects the imbalance of picture position at the top and
bottom.
О ROTATION:
Corrects the picture rotation,
a
S PINCUSHION/a SPINBAL/
q
CBOW:
Corrects the wavy distortion of the picture edges.
О
flare
TOP/
n
flare
ВОТ:
Corrects the flare distortion of the picture at the top and
bottom.
m
V UNEARITY/ в V UN BAL
Corrects the vertical linearity and the vertical linearity
balance.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the GEOM button again.
To reset, press the RESET button wMle the OSD is on. The
selected parameter is reset.
umi)
Press the SCREEN button.
The "SCREEN" OSD appears.
SCREEN
ffillXII
►H CONVERGENCE
i 35
V CONVERGENCE
{■■■iHi 1 79
V CONV TOP
ion
V CONV ВОТ
(■■■■■I 7^
H FOCUS
rnmm
D 50
CANCEL MOIRE
•OFF -ON
MOIRE ADJ
1 1 0
LANDING
ADJUST-*
DEGAUSS
•ON
0 a
SELECT
В Б
SET/ADJUST
Press the
button to select and the
button to adjust the parameter.
H CONVERGENCE/V CONVERGENCE:
Adjusts the horizontcd convergence and the vertical
convergence.
The adjustment data becomes the common setting for all
input signals received.
V CONV TOP/V CONV ВОТ:
Adjusts the vertical convergence at the top and bottom
of the screen.
The adjustment data becomes the common setting for all
input signals received.
14
H FOCUS:
Adjusts the horizontal focusing.
The adjustment data becomes the common setting for all
input signals received.