Sony GDM-W900 - Manual (Page 15)

CANCEL MOiRE:
Cancels the moire when "ON" is selected.
The adjustment data becomes the individual setting for
each input signal received.
MOIRE ADJ:
Reduces fuzziiess of the picture caused by canceling
moire.
Adjust beginning from 0 imtil the moire is minimum.
The adjustment data becomes the individual setting for
each input signal received.
LANDING:
See "Landing" on page 11.
~~ The adjustment data becomes the common setting for all
input signals received.
DEGAUSS:
See "Degaussing the screen" on page 16.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the SCREEN button again.
To reset, press the RESET button while the OSD is on. The
selected parameter is reset.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the COLOR button again.
To reset ail parameters of a particular color
temperature
Select the color temperature in step 2, and then press the
RESET button. All parameters of the color temperature are
reset and "++" at the right shoulder disappears.
To reset a particular parameter of a particular color
temperature
Select the parameter in step 3, and then press the RESET
button. Only the selected parameter of the color
temperature is reset.
' IfciKl ^ il'" li' i! r ’ P ' u i
Reset in the same way as described in "Resetting to the
factory-preset levels" on page 12.
The adjustment data becomes the common setting for all
input signals received.
1 Press the COLOR button.
The "COLOR" OSD appears.
COLOR
►COLOR TBiPERATUPE
-5000K • 3500K -9300K
VAR I ABLE ] 100
R BIAS ] 50
G BIAS
\mÈmm
] 50
B BIAS
\mmmrn
] 60
R GAIN
\wrnmm
] 50
G GAIN ] 50
B GAIN I"“ ] 50
0 Q
SELECT
B B
SET/ADJUST
Press the 3-4-/«^ button to select the color
temperature to adjust 5000, 6500 or 9300.
Press the iii'f/'f button to select and the
button to adjust the parameter.
VARIABLE:
Adjusts the color selected in step 2 to the desired color
temperature. The figure of the selected color
temperature changes.
R BIAS/G BIAS/B BIAS:
Adjusts the black level of each signal. "++" app>ears at
the right shoulder of the adjusted color temperature.
R GAIN/G GAIN/B GAIN:
Adjusts the white level of each signal. "++" appears at
the right shoulder of the adjusted color temperature.
15