Additional features, Set rings to answer – HP 2140 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional features
This chapter contains information on additional features you may want to set or change
for your HP Fax.
•
Rings to answer: Sets the number of rings before the HP Fax answers the phone.
•
Caller ID: If you subscribe to Caller ID through your local phone company, you can
use it with your HP Fax.
•
Block Junk Faxes: In conjunction with Caller ID, you can block certain numbers
from sending you a fax.
•
Favorites
•
Image TCR
•
Distinctive Ring
•
Answer/Receive mode: Determines how the HP Fax responds to incoming calls.
The “arrow buttons" located at the left and right of OK button on the control panel are
designated by < ► in the instructions.
Set rings to answer
You can select the number of rings that will occur before the fax answers an incoming
call.
NOTE: If you are using your machine as both a telephone and a fax machine,
we suggest you set the ring count to at least 4 to give you time to answer.
1. Press Menu repeatedly until
basic
fax
displays and press OK.
2. Press i ► until
Rings to Answer
displays and press OK.
3. Enter the number of rings you want (2-7) and press OK.
The HP Fax rings the set number of times and then answers. It then produces a
different sounding ring to alert you to which type of call is incoming.
•
The additional ring may occur once for a fax call
•
The additional ring occurs 5 times for a voice call.
Additional features
23