Troubleshooting – HP 2140 User Manual

Page 52

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

(continued)

Display

Status/Solution

Remove jammed paper

and press Cancel

The paper has jammed during printing. To clear the paper jam,
see Paper jams during printing on page 41.

Send Error.

Try again.

There is an error while sending a fax.

System Busy

Try again later

The fax machine is busy doing something else.

To redial now, press

Start

The machine is waiting (three minutes) to automatically redial the

fax number that was busy or did not answer.

You have the option to manuaily redial by pressing Start.

Processing Job

You attempted to enter Favorites while sending or printing

Favorites document.

Unknown ink level

A previously used cartridge has been detected. Remaining ink

reported in

view ink Level

and

Ink Low

message may be

inaccurate.

Troubleshooting

Your problem may be listed in “LCD error messages” on page 46. The chart below
shows other problems you can solve yourself. For problems you cannot resolve here,
see Use Hewlett-Packard support services on page 59.

¥

TIP: (For U.S. only) You can test your HP Fax to make sure it is set up properly

for faxing. Place a document in the document feeder, dial 1-888 HP FAX ME

(1-888-473-2963) and press Start. Please wait approximately 1 minute and you

will receive a “Fax Back System Test” page, confirming your product is working

correctly. The Fax Header must be set up in order to test the fax machine.

Fax problems

Problem

Solution

The machine is not working, there is no
display, and the buttons are networking.

Unplug the power cord and plug it in again. Check that your

socket is live.

No diai tone.

Check that the phone line is connected properly to the port in the
bottom of the fax. Unplug and replug it. Make sure it clicks. Check

the phone socket in the wail by plugging in another phone.

Someone calls and gets a busy signal

even though the fax is not busy.

This may rarely occur if the answer mode is set to AUTO, a voice
cail comes in and is hung up without being answered, and another
cail is immediately received. In AUTO mode the machine goes

back to fax receive mode if the voice call is not answered. The line

will appear busy until the machine resets.

48

Care and maintenance

Advertising