HP 2566C User Manual
Page 84
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set the knob in the PRINT AND FORMS ALIGNMENT POSITION
when printing and when aligning the position of column 1. Set the
knob in the FORMS WIDTH ADJUST POSITION when changing the
position or adjusting the horizontal tension of the paper.
Tractor Control Keys
There are two sets of tractor control keys. The main set is located to
the right of the tractors and is only accessible when the swing-gate is
opened (Figure 6-4, C). The auxiliary tractor control keys are located
on the right of the swing-gate and accessible when the swing-gate is
closed (Figure 3-20, B)
Both sets of keys are used in combination with the tractor control
knob to determine how the tractors move. The auxiliary set is
identical in function to the main set but do not contain a middle
(FAST) key.
Pressing the left or right key causes the tractors to move left or right
respectively. The middle key, when pressed with the left or right key,
causes the tractors to move at a faster rate. The tractor control knob
setting determines whether all four tractors or just the two right
tractors move when the tractor control keys are pressed.
:gure 5 .. I orms Loading t;oi “Ti
USING THE PRINTER 6-9