Craftsman 247.887330 - Manual (Page 22)

SERVICE AND MAINTENANCE
MAINTENANCE SCHEDULE
A
warning
Before performing any type of maintenance/service, disengage all
controls and stop the engine. Wait until all moving parts have come to
a complete stop. Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear safety glasses during
operation or while performing any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes
service guidelines only. Use the Service Log column to keep track of
completed maintenance tasks. To locate the nearest Sears Service
Center or to schedule service, simply contact Sears at
1-800-4-MY-HOME®.
Interval Item Service Service Log
Each Use 1. Mower blades 1. As required
2. Loose or missing hardware 2. Tighten or replace
3. Belts 3. Check
4. Engine oil level 4. Check
5. Controls 5. Check for proper operation
6. Mulch plug (if fitted) 6. Check for proper plug installation
1st 2 hours 1. Engine oil 1. Change
25 hours 1. Engine oil 1. Change
2. Air cleaner 2. Clean or replace
3. Mower blades 3. Sharpen and balance
4. Control linkages and pivots 4. Lube with light oil
50 hours 1. Front Wheel Bearings 1. Grease
Annually or 100 hours 1. Spark plug 1. Clean, replace, re-gap
2. Rear Wheels 2. Grease
Before Storage 1. Fuel system 1. Run engine until it stops from lack of
fuel or add a gasoline additive to the
gas in the tank.
22