Craftsman 358.791031 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Never place objects inside the blow­

er tubes, vacuum tubes or blower
outlet. Always direct the blowing de­
bris away from people, animals,
glass, and solid objects such as

trees, automobiles, walls, etc. The
force of air can cause rocks, dirt, or

sticks to be thrown or to ricochet

which can hurt people or animals,

break glass, or cause other damage.

• Never run unit without the proper

equipment attached. When using

your unit as a blower, always install

blower tubes.

• Check air intake opening, blower

tubes or vacuum tubes frequently,

always with engine stopped and
spark plug disconnected. Keep

vents and discharge tubes free of

debris which can accumulate and
restrict proper air flow.

• Never place any object in air intake

opening as this could restrict proper
air flow and cause damage to the
unit.

• Never use for spreading chemicals,

fertilizers, or other substances which

may contain toxic materials.

• To avoid spreading fire, do not use

near leaf or brush fires, fireplaces,
barbecue pits, ashtrays, etc.

BRUSHCUTTER SAFETY

 DANGER:

Blade can thrust vio­

lently away from material it does not out.
Blade thrust can cause amputation of

arms or legs.

WARNING;

Do not use trimmer

head as a fastening device for the
blade.

a WARNING:

The blade contin­

ues to spin after the throttle is re­
leased or engine is turned off. The
coasting blade can throw objects or
seriously cut you if accidentally

touched. Stop the blade by contacting
the right hand side of the coasting

blade with material already cut.

J

ib

WARNING:

inspect the area to

be cut before each use. Remove ob­

jects (rocks, broken glass, nails, wire,

etc.) which can be thrown or become
entangled in the blade or trimmer line.

• Throw away and replace blades that

are bent, warped, cracked, broken
or damaged in any other way.

• Install required shield properly be­

fore using the unit. Use the metal

shield for all metal blade use.

WARNING:

Only use brushcut-

ter attachments that provide a metal

shield with protruding nose.

• Use only specified blade and make

sure it is properly installed and se­
curely fastened.

• Cut from your right to your left.

• Always use the handlebar and a

properly adjusted shoulder strap

with blade (see ASSEMBLY instruc­
tions in brushcutter attachment oper­

ator's manual).

CULTIVATOR SAFETY

^WARNING: Rotating tines can

cause serious injury. Keep away from

rotating tines. Stop the engine and

disconnect the spark plug before un­
clogging tines or making repairs.

^WARNING: Inspect the area to

be cultivated before starting the unit.

Remove all debris and hard and sharp

Advertising