Craftsman 358.791031 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

objects such as rocks, vines, branch­
es, rope, string, etc.
• Avoid heavy contact with solid objects

that might stop the tines. If heavy con­
tact occurs, stop the engine and in­

spect the unit for damage.

• Never operate the cultivator without

the tine cover in place and properly

secured.

• Keep the tines and guard clear of

debris.

• After striking a foreign object, stop

the engine, disconnect the spark

plug and inspect the cultivator for
damage. Repair before restarting.

• Disconnect attachment from the

drive engine before cleaning the

tines with a hose and water to re­

move any build-up. Oil the tines to
prevent rust.

• Always wear gloves when servicing

or cleaning the tines. The tines be­
come very sharp from use.

• Do not run unit at high speed unless

cultivating.

HEDGE TRIMMER SAFETY

A

DANGER:

RISK

of

cut

;

keep

HANDS AWAY FROM BLADE - Blade
moves momentarily after the trigger is
released. Do not attempt to dear
away out material when the blade is in
motion. Make sure engine is stopped,

the spark plug wire is disconnected,

and the blade has stopped moving
before removing jammed material

from the cutting blade. Do not grab or

hold the unit by the cutting blade.

Blades move

momentarily

alter the

trigger is

released.

Allow blades to stop

before removing
them from the cut.

A

WARNING:

Inspect the area be­

fore starting the unit. Remove all de­

bris and hard objects such as rocks,
glass, wire, etc. that can ricochet, be

thrown, or otherwise cause injury or

damage during operation.
• Do not use a cutting blade that is

bent, warped, cracted, broken or
damaged in any other way. Have

worn or damaged parts replaced by
your Sears Service Center,

• Always keep unit in front of your

body. Keep all parts of your body
away from the cutting blade.

• Keep the cutting blade and air vents

clear of debris.

POLE PRUNER SAFETY

^WARNING: The reciprocating

blade/rotating chain can cause severe
injury, inspect the unit before use. Do
not operate unit with a bent, cracked

or dull blade or dull chain. Keep away

from the blade/chain.

^WARNING: The reciprocating

blade/rotating chain is sharp. Do not

touch. To prevent serious injury, always

stop engine and ensure blade/chain

has stopped moving, disconnect spark
plug, and wear gloves when changing

or handling the blade or chain.

WARNING:

A coasting blade/ ro­

tating chain can cause injury while it

continues to move after the engine is
stopped. Maintain proper control of the

unit until the blade/chain has completely

stopped moving. Keep hands, face and

feet at a distance from all moving parts.

Do not attempt to touch or stop the
blade or chain when it is moving.

^WARNING: Falling objects can

cause severe head injury. Wear head

protection when operating this unit

with a pole pruner attachment.

©

nWARNING:

To prevent serious

injury, do not use more than one boom

extension with a pole pruner attach­

ment.

A

w

ARNING:

Keep the pruner

away from power lines or electrical

wires.

• Only use for pruning limbs or

branches up to 6 inches (15 cm) in

diameter.

Advertising