Craftsman 320.48291 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Using The Level With A Tripod (Not Included}
Because the Pa!m Grip Laser Level ts a “for
ward" projection device, it can be placed on any
reasonably level flat surface to draw a plumb
vertical line. When used in conjunction with any
standard tripod (1/4-20 UNC threaded fitting)
versatility is further enhanced (See Fig. 11).
Mounting The Level To A Tripod (See Fig. 12)
1. Attach the All-Position Leveling Base to
the tripod using the standard 1/4-20 UNC
threaded fitting included with the tripod.
(See Fig. 11).
2. Place the level on the All-Position Leveling
Base.
3. Push the “ON/OFF" button once to turn
the level. DO NOT point tool in the direction
of your eyes or anyone else's eyes in the
vicinity of use.
4. Determine a line with two points A, B (Fig. 12). Align your laser fan beam to
these points.
Fig. 11
48291 ManuaLRevIsed.OBOSOT
Page 10