Craftsman 320.48291 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^FETY INSTRUCTIONS
A WARNING BE SURE to read and understand all instruction in this manual
before using this Laser Level. Failure to follow all instructions may result in
hazardous radiation exposure, electric shock, and/or bodily injury.
A CAUTION The use of optical instrument with this product will increase
eye hazard. Use of controls or adjustments or performance of procedures
other than those specified herein, may result in hazardous laser radiation
exposure.
IMPORTANT: The following labels are on your
unit. They indicate where the laser light is emit
ted. ALWAYS BE AWARE of their location when
using the laser tool. ALWAYS MAKE SURE that
any bystanders in the vicinity of use are made
aware of the dangers of looking directly into the
laser.
L AVOfD EXPOfiUftE'
X Ln*r b
S «mlltnf ihrouth
I Dtb
WARNING! LASER LIGHT. LASER RADIATION,
Avoid Direct Eye Exposure. Do Not Stare into
Fan Beam.
1. DO NOT remove or deface any product labels Removing product labels
increases the risk of exposure to laser radiation
2. DO NOT stare directly at the laser fan beam or project the laser fan beam
directly into the eyes of others. Serious eye injury could result.
3. DO NOT place the too! in a position that may cause anyone to stare into the
laser fan beam intentionally or unintentionally. Serious eye injury could result,
4. DO NOT use any magnifying optical tools such as, but not limited to tele
scopes or transits to view the laser fan beam. Serious eye Injury coufd result,
5. DO NOT operate the tool around children or allow children to operate the
tool. Serious eye injury could result.
6. ALWAYS turn the tool off when not in use. Leaving the tool on increases the
risk of someone inadvertently staring into the laser fan beam
7. DO NOT operate tool In combustible areas such as in the presence of
flammable liquids, gases or dust,
8. When using any of the base plates. ALWAYS check to be sure that the tool
is securely mounted on the base. Damage to the tool and/or serious injury
to the user could result if the tool falls.
9. ALWAYS use onty the accessories that are sold by Sears for use with this
product. Use of accessories that have been designed for use with other laser
tools could result in serious injury.
10, DO NOT use this tool for any purpose other than those outlined in this
manual. This could result in serious injury.
«18291 MamaLRevisetl 06C907
Page 3