Craftsman 320.48291 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
TO TURN THE TOOL ON/OFF
The button to turn the Craftsman Palm Grip Laser Level ON/OFF is located on
the fop housing of the tool,. (See Fig. 1)
1. To turn the Palm Grip Laser Level ON, push the “ON/OFF" button down
once.
2. To turn OFF, push the button down once.
A WARNING When turning ON the Palm Grip Laser Level, ALWAYS be
aware of protecting your eyes and those around you. NEVER point the Palm
Grip Laser Level at anyone’s face including your own.
USE OF LASER ENHANCING SAFETY GLASSES (Supplied) will improve
the performance of the tool in bright light conditions.
A
WARNING Laser Enhancing Safety Glasses WILL NOT protect the
eyes from damage that could result from looking directly into the laser
projection.
The Palm Grip Laser Level
Is A Two-Piece Device
The All-Position leveling base has
two built in magnets. One magnet
attaches the palm laser to the
base. Another magnet is located
on the bottom of the base and will
allow it to attach to a steel plate.
Pulling the two pieces apart will
separate them as shown in Fig. 6.
Fig. 6
48291. ManuaLRBVisBd„0BC907
Page 7