Craftsman 320.48291 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Referencing And Leveling Across Two Adjacent Surfaces
The Palm Grip Laser Level can be used to align a single object or objects on
two adjacent walls. The All-Position Leveling Base has a magnetic bottom that will
attach to virtually any steel surface. The laser has a broad range of applications,
such as aligning tile on the wall, lining up kitchen and bath cabinets, hanging
wallpaper, aligning junction boxes and laying wall or floor tile. The Palm Grip
Laser Level's laser fan beam is also useful when working with two adjacent surfaces.
Fig. 13 illustrates the use of the laser fan beam in aligning pictures on two oppos
ing walls. Keep in mind that the bubbles of Y-Vial and Z-Vial should be adjusted
so the bubbles are in the center of each vial.
Fig. 13
48291 ManuBl_Revisecl_0BO907
Page 11