Nikon N80 - Manual (Page 105)

Mi
'.y
iié
Lens aperture Instant-return type, with depth-of-field preview button
Autofocus TTL phase detection, Nikon Multi-CAM900 autofocus module
• Detection range: EV -1 to EV 19 (ISO 100, at normal temperature)
Lens servo • Single Servo AF (S), Continuous Servo AF (C), Manual focus (M)
• Focus Tracking automatically activated in subject’s status in Single
Servo AF (S) or Continuous Servo AF (C)
Focus area One of five focus areas can be selected
AF Area mode • Single Area AF
• Dynamic AF (Dynamic AF Mode with Closest Subject Priority is
available)
Focus lock Focus is locked by pressing ® button or lightly pressing shutter
release button in Single Servo
AF
Metering system TTL full-aperture exposure metering system
Three metering systems selectable (limitations with lens used)
• 3D Matrix Metering
• Center-Weighted Metering: Approx. 75% of the meter's sensitivity
concentrated on the 12mm dia. circle
• Spot Metering: 4mm dia. circle (approx. 1 % of entire frame)
Metering range 3D Matrix Metering: EV 0-21
Center-Weighted Metering: EV 0-21
Spot Metering: EV 3-21
(at normal temperature, ISO 100, f/1.4 lens)
Exposure meter coupling CPU
Exposure compensation Exposure compensated in ±3 EV range, in 1/2 steps
Auto Exposure Lock Detected exposure value locked by pressing ® button
Auto Exposure
Bracketing
Bracketing range: ±2 EV; number of shots: two or three; bracketing
steps: 0,5, 1, 1.5 or 2 EV
Film speed setting • DX or manual selectable
• Film speed range: DX: IS025-5000, Manual: ISO 6-6400 in 1/3
steps
1 0 5