Ip: auto-multi program, I rotate the exposure mode select dial to select p, Compose picture, focus and shoot – Nikon N80 User Manual
Page 50: Shooting in each exposure mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Shooting in Each Exposure Mode
IP: Auto-Multi Program
The camera automatically controls
exposure according to the exposure
combination in the program chart for
exposure that is correct for any shooting
situation. Suited for situations such as
when taking a snapshot, where you want
to concentrate only on the shutter release
opportunity. For more complex shooting,
use Flexible Program, exposure
compensation (page 60) or auto exposure bracketing (page 61).
•Auto-Multi Program can only be selected when using a CPU Nikkor
lens (page 34).
i
Rotate the exposure mode select dial to select P.
2
NOTE: Minimum aperture with CPU Nikkor lens (except G-type)______________
Always set the aperture ring of a CPU Nikkor lens (except G-type) to Its
minimum (largest f-number). When the lens Is not set to Its minimum
aperture setting, f££ blinks in the LCD panel and viewfinder and the
shutter locks.
• When a non-CPU lens is attached, f- - blinks in the LCD panel and
viewfinder, and the shutter cannot be released. In this case, set the
exposure mode to Manual (page 56) and set/confirm aperture with the lens
aperture ring. Camera's exposure meter cannot be used. See “Lens
Compatibility” on page 34 for details.
Compose picture, focus and shoot.
• When the subject Is too dark or bright, one of the following warning
indications will appear in the viewfinder or LCD panel.
• ht I: Use ND filter.
• L o: Use Speedlight.
50