Determining aperture, Ttl mode, For ttl automatic flash exposure control) – Nikon Autofocus Speedlight SB-22 User Manual
Page 23: Determining aperture -32, In ttl mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DETERMINING APERTURE----------------------------------
TTL Mode
(for TTL Automatic Flash Exposure Control)
TTL mode is for exclusive use with Nikon F-501/N2020, F-401/N4004,
F-301/N2000, FA, FE2 and FG cameras only.
For TTL auto flash operation with the Nikon F-501 /N2020, F-401 /N4004 or
F-301/N2000, be sure to set the camera to aperture priority auto or manual
exposure mode.
For correct exposure in TTL mode, use film with a film speed specified in
the table below:
Camera
Film speed
F-501/N2020 and F-301/N2000
ISO 25 to 1000
F-401/N4004, FA, FE2 and FG
ISO 25 to 400
Set SB-22’s mode selector
'to TTL.
To determine aperture with the SB-22’s aperture selection/shooting dis
tance range panel for TTL auto flash operation, read the following:
(For programmed TTL auto flash operation, see pages 9 to 10.)
17