Determining the exposure – Canon AT 1 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Determining the Exposure
Turn the camera toward the subject and
look into the viewfinder to insure that the
meter needle swings and rests still somewhere
between the upper and lower exposure
metering index marks. Then, turn the shutter
speed dial and/or the aperture ring until the
circular aperture needle bisects the meter
needle. These are the steps for getting the
correct exposure. On most occasions, it is
more convenient to predetermine the shutter
speed then turn the aperture ring.
The upper and lower halves each express half
an f/stop gradation; the full width of the
Advertising