Canon AT 1 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cancelling the Self-Timer Operation
If you should want to cancel the self-
timer operation after having pressed the
shutter button, set the main switch to OFF on
the top side of the camera. Then, the self-
timer lamp stops blinking and the self-timer
operation will be cancelled. If the main switch
is not set to OFF and the self-timer lever
is returned to its original position, the shutter
will be released.
Adapter A for Tripod
When using a lens of considerable overall
length, depending on the tripod being used, it
may be difficult to hold the adjustment in the
case of accidental bumping of the lens. In
such cases, the rubber Adapter A for Tripod
may be placed between the tripod head
and the camera.