Exposure metering with fl lenses – Canon AT 1 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Exposure Metering With FL Lenses
When Canon FL lenses are used on the
AT-1, it is necessary to take a stopped-down
meter reading. After pressing in the stopped-
down lever until it locks, adjust the aperture
ring and/or shutter speed dial until the meter
needle inside the viewfinder is aligned with
the aperture needle to obtain the correct
exposure.
After
determining
the
correct
exposure, release the stopped-down lever and
compose and focus at maximum aperture.
Advertising