Loading the film – Canon 130U User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Loading the Film
1 Open the back cover
and load the film.
^ Position the film
correctly between the
film guides.
3 Pull the film out to
the (film leader
position indicator).
• Make sure that there is
no slack in the film when
you pull it out
• If you pull out too much
film, wind the film back
into the cartridge slightly
Close the back cover.
^The film automatically
winds on to the first
frame and “1" appears
on the frame counter.
H - i i
Advertising