Removing the film – Canon 130U User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading the Film
ra
»A film speed of ISO 400 is recommended.
• The film speed is set to ISO 25 when non-DX
film is loaded. If the film does not have a DX-
code, insert it into the film compartment, close
the back cover and press the shutter button
once or twice.
• For slide (reversal) film, you can use DX-
coded film speeds of ISO 25, 50, 100, 200,
400. 800. 1600 and 3200.
Removing the Film
' ^
t
The film rewinds
automatically when it
reaches the end
When S blinks, open the
back cover and remove the
film.
* •
Rewinding the Fiim in Mid-roii
• Use the strap buckle pin on
the strap buckle to press
the ^0 button on the
bottom of the camera.
• Hold the button down until
the film starts to rewind.
H-12