Canon 130U - Manual (Page 23)

AUTOi Flash AUTO
In dark places and in backlit conditions, the flash fires
automatically.
You can select whether the autoflash mode
^ initially set when you switch the camera on is
AUTOV^ or AUToi- Set the camera to the
desired autoflash mode and then switch the
camera OFF.
You can use the CF2 Custom Function setting
to specify that whichever flash mode is active
when you switch off the camera should be
stored in the camera’s memory. (->26)
AUTOÌK@> Flash AUTO with Red-eye
Reduction
In dark places, the flash automatically fires after the
red-eye reduction lamp has lit.
You cannot shoot while the red-eye reduction lamp is
on (for approximately 1 second). Keep pressing the
shutter button untii you hear the sound of the film
winding on
ft Flash ON (Fires for all shots)
In this mode, the flash fires regardless of the light
conditions when the picture is taken. Use this setting
for fill-in flash in daylight or to soften the shadows of
the subject.
® Flash OFF (Never fires)
In this mode, the flash does not fire regardless of
how dark conditions are when the picture is taken
Use this mode for sunset shots, for places where
flash use is prohibited, or for available-light
photography.
d-23