Mounting the flash – Canon 540EZ User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Mounting the Flash
Turn
the
lock
nut
several
times In the direction of the
arrow to loosen.
Slide the flash unit’s mounting
foot fully Into the camera’s
accessory shoe until it stops.
Turn the lock nut in the oppo
site direction to secure the
flash firmly to the accessory
shoe. (The lock pin protrudes
from the bottom of the foot to
lock the flash in place.)
• To remove the flash, loosen the
lock nut by turning it ali the way
until it stops, then slide the
mounting foot out of the acces
sory shoe.
Even though lock pin holes are not provided on the EOS 650, EOS 620, EOS 750
or EOS 850, the 540EZ can be mounted without any problem.