Multiple flash setups, Multiple flash connection example – Canon 540EZ User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To set the 540EZ to second-cur
tain sync mode, press the Plus
button and Minus button simulta
neously.
• The second-curtain sync indicator
appears in the LCD panel and
the flash enters second-curtain sync
mode
• Each time the Plus and Minus but
tons are simultaneously pressed,
the synchronization mode alternates
between first-curtain sync and sec
ond-curtain sync. When first-curtain
sync is selected, the second-curtain
sync indicator H» disappears from
the display.
Second-curtain sync cannot be set or canceled while flash settings are blinking in
the display after the Select/Set button is pressed.
To set or cancel second-curtain sync in this condition, first press the Select/Set
button until the flash settings stop blinking.
7. Multiple Flash Setups
Use of several flash units positioned effectively at different angles to the
subject can produce a more balanced, three-dimensional lighting effect
than can be achieved vyith a single, on-camera flash unit. With Canon's
optional multiple flash accessories, easy TTL automatic flash exposure
control is possibie even with several flash units, eliminating the need for
difficult exposure calculations. All of Canon’s E2 Series and E Series
speedlites, as well as the 480EG grip-type speedlite and the ML-3 Macro
Ring Lite, can be used in multi-flash setups comprising as many as four
flash units.
• Multiple Flash Connection Example
Off'Camera Shoe Adapter
TTL Hot Shoe Adapter 3
TTL Distributor
Connecting Cord
25