Canon 540EZ User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Firing Frequency, No. of Bursts, and Power
Level
"I
Set the flash mode to MULTI
(stroboscopic flash) mode.
Zoom. S
0
mm
MULT)_S—
S
h z
OSi.T 1 tJi
i
^
m
Each press of the Select/Set
button
changes
the
blinking
display in the LCD panel in
the cycle shown below. Each
number
setting
can
be
changed while it is blinking.
Firing frequency —> No. of bursfs ^ Power level
--------------- Enfire display steadily lit <-------------
□
Press
the
Plus
button
or
Minus button to change the
blinking number as desired.
Press
the
Select/Set
button
again.
The
current
setting
stops blinking, and the next
setting
in
the
cycle
starts
blinking.
• The number will automatically
stop blinking and be set if 8
seconds elapse before fhe
Select/Sef buffon is pressed.
20