Inserting new lithium battery, Inserting new littiium battery – Canon E 200 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

18

Inserting New Lithium Battery

The CR2025 type lithium battery provides your

camera with enough power to store the date

and time and a character title, even when the

camera is turned off.

One lithium battery will last approximately one

year. (Life span of lithium battery varies slightly
according to ambient conditions.) When the

iithium battery is not in place or is nearly

exhausted, “DATE” flashes in viewfinder,

indicating that the iithium battery needs to be

replaced. |EQ
Be sure to connect a power source to the

camera before changing the lithium battery,

othenvise, the date and time and a character

title will be cleared from camera’s memory and
will have to be reset.

Inserting Procedure

1. Press GRIP UNLOCK button and

rotate the grip downward.

2. Hold the camera with the battery

pack facing down, then draw out

the lithium battery holder.

• If the camera is held with the battery pack

facing up, the lithium battery will drop out
when the lithium battery holder is removed.

3. Insert a new lithium battery into

the lithium battery hoider with +
side facing up.

Snap the lithium battery holder
into the compartment.

Warning

The battery used in this device may present a fire or
chemical bum hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic CR2025 or Duracell

DL2025B. Use of another battery may present a risk

of fire or explosion. The used battery should be
handed back to the supplier for safe disposal.

Caution

----------------------------------- ----------------

• Make sure

+

side is facing up in lithium battery

compartment.

• Keep battery out of children's reach. If swallowed,

contact physician immediately.

• To ensure proper contact, wipe battery with dean,

dry doth before use.

• Do not pick up battery using tweezers or other

metal tools which may cause short drcuiting.

• Do not disassemble, heat or immerse in water, to

avoid risk of explosion.

Advertising